Modular CAN/PLIP alarm system
Built-in ultrasonic volumetric sensor
High power siren
Double wire CAN network interface

Installation  time
Protection
Comfort

Siren power: > 115 dB (A)
Max. consumption: < 16 mA

 - 20 min

Advantages

The system is designed to be fully compatible with a wide range of CAN bus vehicles and can be used also for non CAN based vehicles (PLIP)

The Data Linker programming tool and "Antares" software allow to configure the product with the vehicle specific application files available on the web

The system is designed to cut fitting time and to provide major flexibility as it can be easily customized for the destination vehicle, thanks to the CAN compatibility

Kit main parts  Alarm unit with built in volumetric ultrasonic sensor  Universal wiring harness  High power siren  Emergency panel with led – PIN code card  CD with user and installation manual    System arming and disarming Vehicle original remote control: by closing and opening the vehicle with its original remote control the system arms and disarms Electronic emergency disarming (PIN code by push button): in the event of loss or failure of the radio remote control, the system can be deactivated by entering a PIN code    Protection functions Single engine immobilisation: once the system is armed starting becomes impossible “Passive” arming of the immobiliser (programmable): the vehicle engine is immobilised automatically 115 seconds after the ignition has been turned off to arm the system even in the event that you forget to close the car via the remote control “Passive” arming of the complete system (programmable): the system automatically arms about 30 seconds after the ignition has been turned off, even in the event that you forget to set the system via the remote control Automatic re-arming in case of accidental disarming (programmable): if the vehicle is originally equipped with the automatic doors closing the system will also rearm automatically Additional output for siren/car horn (programmable): allows the connection of the original vehicle horn or the connection of an additional siren Perimetric protection by contact (door, bonnet, boot): any attempt to open any doors, boot and bonnet will cause an alarm Ignition lock protection: triggers the alarm if ignition is turned on while the system is armed Built-in pre-set ultrasonic volumetric protection (excludable): no need of any sensitivity adjustment. The volumetric detection can be temporarily switched off in a simple way Audible alarm (high power siren) Visual alarm (flashing of the turn indicators during the alarm-cycle) Anti-hijack function (programmable): the alarm is triggered in the event that the driver is aggressed and the vehicle stolen with the engine running; once ignition is turned off, re-starting becomes impossible

Product data  Nominal operating voltage (VDC): 12  Operating voltage range (VDC) : 8 – 16  Alarm unit operating temperature (°C): - 40 + 85  Siren operating temperature (°C): - 40 + 85  System (unit + siren) current consumption (mA):  armed 7  disarmed 5  Siren sound pressure level (dBA): >115  Dimensions (mm):  alarm unit 91 x 67 x 33  siren 67 x 75 x 40  Weight (g):  alarm unit 90  siren 207  Origin: made in Italy  Warranty: 24 months    Homologations  ECER116 (security, E marking)  ECER10 (electromagnetic compatibility, E marking)  99/5/EC (use of radio spectrum , CЄ marking)    Accessories  AM5462: hyperfrequency volumetric sensor  AM5452: level monitor  AM2057: shock sensor  AM8509: double engine immobilizer  AM2980: automatic window closure module for cars without this function    Comfort functions  Alarm memory and diagnostics: in the event that the system is triggered during the driver’s absence, the latter is notified by audible and visual signals upon disarming  Check function: during the inhibition time the protection functions can be tested without generating a full alarm cycle  Doors closure check: during the inhibition time the system signals if any doors, boot and bonnet have been left opened  Exclusion of external optional sensors: the additional sensors can be temporarily switched off in a simple way  Garage mode (programmable): to allow the vehicle usage in case of maintenance. All automatic functionalities will be excluded until the engine will have been started for 10 times